CLICK ON THUMBS TO ENLARGE

Rohn 80, 20' Tower Sections (assembled in 2001) with these "leg pipe numbers"on the connecting plates welded to the pipe legs.
8- KL1326 (3" I.D. pipe) Single laced sections #85H20B2S or #HB20C2S ? (different #'s depending on brace used....check on this)
1- KL1323 (3" I.D. pipe) double laced with 10.5 x 11.5" plates welded 2' from one end (antenna attachments plate?)
2-KL63 (2 3/8"I.D. pipe) double laced #84HX20CS ?
1- KL63 SATC (2 3/8" I.D. pipe) double laced has a 6 X 6" plate welded perpendicular to tower #84HX20CSATC ?

1- base pier (4.5' tall) with bearing plate and 1 7/16 x 24' pier pin

3- 20' long dead men anchors made of 3/8" X 4" angle including 1" X 16" pins

2- Torque arm assembly, components are 6- 7' long, 4'"x 16" channel

Spools of galvanized EHS cable with estimated lengths in parenthesis (Internet posted prices show $11- 14,000 for all 3 spools)
1- 3/4" 19 strand on 3' high spool (2800')
1- 5/8" 7 strand on 3'high spool (2400')
1- 9/16" 7 strand on 2' high spool (2000')

Turnbuckles
6- 1 1/4 x 21"
12 1 X 15"

Shackle
6- 1 1/8'
4- 1'
6- 7/8'
12- 3/4'
12- 5/8'
12- 9/16'

Big Grips and end sleeves ($1728)
12- 3/4"
12- 5/8"
12- 9/16"

Stepbolts = 255 each

Bolts
19- 3/4 x 6"
23- 3/4' x 3"
5- 3/4 x 2 5/8"
22- 1 x 3 3/8"
28- 1 x 3 5/8"
13- 1 x 4"

Heavy plate steel (some for the torque arm assemblies)
6- KC775
6- KC 776
6-KC465
6- Heavy bent plates

Miscellaneous
48- heavy square washers
3- 6 x6' heavy plate with two holes

Tightening Cable washers
13- small
11- medium
12- large

6- cable clamps (need to check size)

CLICK ON THUMBS TO ENLARGE

Phone: (360) 474-8991

sales@usedtowers.com